PROFESSIONAL FOGGING/MISTING SYSTEM

They are available in Polyethylene, Nylon and Stainless steel

FITTINGS

There are two types of fittings for the professional fogging system

1) Slip lock fittings  2) Ferrule fittings

Slip lock connectors are very easy to use, but cannot be removed or reused.

Ferrules can be removed and reused after changing their inner rings. 

Spare inner rings to be kept if removal becomes necessary

For 9.52 mm size tubes, slip lock or ferrule fittings should have 9.52 mm inlet and outlet

and 3/16unc female threads for connecting the mist/fog nozzles.

 The normal distance between one mist /fog nozzle and another is one meter.

This could be 60 CM to 1.5 meters, according to the thickness of fogging you require

 The distance kept between one fog line and another is normally four to five meters.

A 100-meter fog line usually requires 90 nozzles and a flow rate of

5 litres to 6 litres per minute with a 60 to 80 bar water pressure.

Controlling the water pressure by a pressure meter will

provide either fog or mist effects, as per your choice 

When you buy a fog pump, please check its consumption of electricity, flow rate,

We have fogging machines from 0.2 litres to 15 litresThe  per minute, and the 

The selection of  a fogging machine is based on the total area to be covered.

A special automatic high-pressure and low-flow-rate pump is used for fogging 

Flow rate and water pressure are important in any fogging system.

 We need to use a high precision filter in between the pump and fog line.

For this, a filter with 5um filter media is used.

Nozzles with 0.15mm and 0.10 mm orifice will not leave water vapour on the

floor if you provide the required water pressure and flow rate

As the outlet of water pumps is normally ¼ (6.35mm) or 1 inch

with female threaded outlet, please use a transfer joint to connect

it with 9.52 mm (3/8 inch) fog tubing.

.

We provide free consultancy on installation after the purchase

Please WhatsApp +91-8089811575 for details