DIGITAL WATER TIMER WITH 1 INCH(Dn25) SOLENOID VALVE
FOR THE AUTOMATION OF WATER SUPPLY LINE 

Imported- Six months warranty

 Solar powered - Helps to avoid main control unit 

No electric wiring- Works on 9V battery - Can directly fix on PVC water supply line

Synchronized with 1" Solenoid valve.

The valve opens and closes according to the settings of the timer 

Installation of this device replaces the main control unit and the

conventional and complicated wiring used to automate garden irrigation 

TOTALLY SOUND FREE TIMER AND SOLENOID VALVE

Please click here for the YouTube video

How it works

Timer settings

Sold with one year warranty against manufacturing defects 

Price include Water timer and Solenoid valve only

This can be purchased separately in case one of this unit fails to operate

Protective cover for the solenoid valve timer is sold separately

Features and specification of Digital solenoid Water Timer 

Digital Type Water Timer with solar panels and 8 different run time and frequency settings.

Water supply line is directly connected with the solenoid valve and it works in tune

with your water timer programs/settings 

Operates on a  9V box type normal or rechargeable battery

You can set a total  8 ON settings per day for any day in a month

When connected with a pressure pump, the pump will switch on and off

automatically according to the settings of your water timer 

 (Solenoid valve opens at your timer settings allowing water to flow

and  the pressure pump start working. when the valve closes, pump stops) 

What is a Solenoid valve 

A solenoid valve regulate the flow of water in an irrigation system.
By applying a voltage over the coil, the valve opens and the liquid/water start flowing through the supply line. Solenoid
valves are used for the automatic on and off control  of liquids and gas, including dilution of pesticides and liquid 
fertilizers  with water for agricultural purpose. Solenoid valves are also used for the automatic diversion  of the flow. 
This irrigation series of Solenoid valve has a pilot-type pulse valve 
Counter clock wise rotation opens and the clock wise rotation closes it

Specification of Solenoid valve :

Reinforced Nylon Body PA66( Germany) 

Work pressure 0.02-0.8mpa  / Operates on 9V solar powered rechargeable battery 

Operating voltage : DC 9V-24V / Sealing material : Flurine rubber (VITO)

Working medium : Liquid, Water, Gas and light Oil (viscosity 20< CST)

Medium temperature : 0-70 Degree C / Environment temperature : 10 to 50 Degree C

Coil protection class: IP68 / Advanced lever -type lead diaphragm junction 

Manual rotary switch for opening / Flow regulating switch to manually adjust the flow rate

Mouth diameter : 1" Female threads ( Dn25A) / Inside size (cm) : 

The media and the first part of the metal is completely isolated  for anti- corrosion.

This solenoid valve has noting to do with the supply or pressure of water and it is controlled by its own

water timer that makes the valve switches on and off according to your preset timing.

Structural characteristics and working principle

The valve is equipped with a valve opening cum flow control knob and stainless

steel filter for liquids. When the power is on, the pilot valve spring rise. 

In the event of power failure or emergency, manual knob 

can be used to close the solenoid valve  with the flow of water or the pipe line.

and it not to be installed at explosive and dangerous areas Counter clock wise rotation

increases the flow  If the water flows even after closing the valve,5. Flow of water can be

adjusted by rotating the manual knob. and the clock wise rotation reduces it.6.

Before checking the filter, please switch off the power and close the flow of water 

please unscrew the cleaning knob to clean the filter. If  the problem persists, please

open the solenoid valve stainless steel seat and open the three small holes inside with a needle

Please note

 Solenoid valve is best to install with its coil up and in a vertical position.
 The parameters of the solenoid valve should be consistent./ (The arrow mark on the solenoid valve should be consistent)
 The valve is not equipped with any explosion-proof device / Its good if the installation is wrapped with some water proof material 
5. Do not give too much force when tightening the threads

HOW TO SET UP THE TIMER

To easily setup the timer, gently lift and carefully detach the timer connection from its solenoid valve

Open the back cover and insert the 9V battery

Time appear in two digits - Set the current time by pressing TIME and then CURSOR up and down

Timer has 24 hour time format - Press SET to set your current time in 24 hour format

Press PROGRAM and your first program is displayed

-You have a total 8 programs available for each day

PROG 1- Press SET

START TIME-Use Cursor to adjust and press SET

RUN TIME- Use cursor to adjust and press SET

DAYS IN A MONTH-Use cursor and press SET

(Use up and down cursor button on the left  to adjust program features)

when all your required programs are set, finally press OFF 

OFF indication on the display screen will turn to ON when the program is functioning 

Like wise, you may set either all 8 programs or any number of programs that you require

If you want only 2 watering timings in a day, only two programs will be sufficient 

When you reinstall the battery, you have to reset the current time only

To test the functioning of timer and solenoid valve any time, please follow this 

Press ON

Timer indicates current time and run time

Use CURSOR and SET buttons and set up the run time in hours or minutes

Timer makes  a tick sound and the ON is displayed 

Water is delivered and the Timer displays OFF when the run time is over 

  

For terms and discounts, please Click here 

Facebook Page   flickr.com  YouTube  WhatsApp

 SKYPE: www.vikon.in / WhatsApp :+91-8089811575
Call : 91-8089811575 for English / Malayalam and 91-9846093390 for Hindi 
Copy right of images are vested with their respective owners