THIS PAGE UNDER COINSTRUCTION. PLEASE VISIT AFTER 30 DAYS
PVC GREEN HOUSE STRUCTURE
Anyone-with simple tools can build a simple greenhouse cheaply & easily.
To build a PVC greenhouse, you'll need:
PVC pipes, few connectors and clamps and UV protected Green house film for covering Here follows the diagram and step by step guidanceRequired tools : Measuring tape / Hammer / Few screws and a Screw driver / Scissors / Axe / U clamp
GREEN HOUSE SQARE TYPE
MODEL-1
We provide required materials except PVC pipes that you have to buy locally
PVC STRUCTURE FOR THE GREEN HOUSE ARC TYPEMODEL 2
Green house made by PVC pipes are the most easy and economical idea for cultivating plants and crops in a controlled environment throughout year.
Basic information Please check with your local authorities and make it sure that no law / building code in your area restricts the construction of Green house by PVC pipes PVC pipes and fittings are locally available and the standard length of pipe is 20 feet which is equal to 6.1 metersTo reduce transportation cost, its advisable to buy PVC pipes locally. In this sample structure, we use PVC pipe with 1 inch diameter
MeasurementFold the PVC pipe so that it will curve upward like a half circle with a diameter of 4.3 meters. This diameter of 4.3 meters will be the length of the base width of our greenhouse. This PVC pipe half circle / arc will be supported by the frame of the door as shown below.Determine where the door frame will support the PVC pipe arc.
As we know, the maximum height is at the center point
Select a ground site which is 14 feet in width and a length of at least 20 feet.
Maximum length is determined by your actual requirement
The site selected should be free from shading of buildings and trees as we need proper
sunlight in the green house. Cover the selected area with some plastic
sheets for few weeks so that all weeds are removed and make sure
that there is proper drainage for excess water
As we know, the maximum height is at the center point
Select a ground site which is 14 feet in width and a length of at least 20 feet.
Maximum length is determined by your actual requirement
The site selected should be free from shading of buildings and trees as we need proper
sunlight in the green house. Cover the selected area with some plastic
sheets for few weeks so that all weeds are removed and make sure
that there is proper drainage for excess water
Assuming that you are building the structure on the plain land, make four holes with 2 feet depth for the two door frames that is to be fixed on both sides and this door frames at both ends will be the support for the entire green house. If you are building your Green house on the terrace, its advisable to fixthese door frames in concrete Size of door frame Cut 4 Pcs of 2.5 Inch PVC Pipe of 2.71 meters length and two pieces of 2.5 inch PVC pipe with a length of 0.92 meters This is to be used as the frame of door s on both ends Make sure that each pole for the door frame is 2.1 meters above the surface (The total length of poles is 2.71 meters each - Now 0.70 meters under the soil ) Roofing
The roofing PVC pipes are 1.5” thick and 20 feet long The spacing between one roofing arc pipe and the next is 3.5 feet.
The length of our greenhouse is 20 feet. and that is the standard size of PVC pipes
This means we need 7 pieces of 1.5” thick PVC each 20 feet long
We require the following
7 Pieces of 1.5 inch thick PVC - each 20 feet long
2 more pieces of PVC pipe with 1.5 thick , 20 feet long for two horizontal lengths
2 Pieces of 1.5 inch thick pipe each 20 feet long for the cross sections
7 Pieces of 1.5 inch thick PVC pipes each 3.5 feet long for the top section ( E and F)
One bottle of good PVC glue / Its advisable to use UPVC pipes
Required UPVC connectors
Connectors are used in extending the pipes or in curving and connecting the PVC pipes 2 more pieces of 1 inch size 3 WAY CONNECTORS for the two top ends ( Refer F above) 5 pieces of 1 inch size 4 WAY CONNECTORS for the 5 top sections( Refer E above)14 pieces of 1 inch long ground clamps or ground anchor(if the construction is on land) to firmly hold the horizonal frame with the groundIf your Green house is on terrane adopt suitable method Wooden or polycarbonate panels to be cut in length with 1 feet height to coverthe bottom line of the green house except the door space.Make holes on these panels so as to connect each other using nut and bolt
The work
Lay the ground pipes as illustrated and remember to include the appropriate PVC connectors at the right spacing and fix the ground stakes Do not fix permanently but give room for little spacing if required at the final finishing Bend the front PVC pipe as shown in the picture and firmly tie it with the door frame at both corners ( Refer D in the picture ) The two ends of the folded pipe to be fixed in the 3 way connector so as to make an arcRepeat the same with all remaining PVC pipes cut ready for the roofing Make sure that you have inserted all required connectors if you plan to fix more cross sections for the side walls of the green house
Doors for the Green house
we require doors and windows for ventilation
Use snap clamps to fix poly sheets with the PVC pipes to cover the Green house
THIS PAGE IS UNDER CONSTRUCTION. PLEASE VISIT AGAIN
PVC Green House Structure -Info
- Product Code: 100000
- Availability: In Stock
-
Rs.0/-
- Ex Tax: Rs.0/-